显示标签为“Piles”的博文。显示所有博文
显示标签为“Piles”的博文。显示所有博文

2011年7月13日星期三

Genius hybrid heatsink fan can make your computer run faster

Most computers deal with heat the same way: there's a heat sink (a big radiator) attached to the processor, and a fan that blows air over it. Combining these two things into a heat sink that spins is a brilliant new idea that will make your entire computer cleaner, faster and more efficient.

The problem with traditional heat sinks (the big copper finned things that you probably have inside your computer right now) is that while all that surface area is fine for transferring heat away from the processor, a layer of air clings to the fins, acting as in insulator. To compensate, you can crank the fan up to move more air,For all DVS Bedding in PDF format.GreenRay's hydraulic hose design uses a different energy storage approach, but that's noisy and annoying and wastes energy. And since the heat sink itself doesn't move, those fins become a great place for dust to collect, which just makes everything worse.

Jeff Koplow, a researcher at Sandia National Laboratories,Welcome to the official Facebook Page about RUBBER MATS. has developed an "air bearing heat exchanger," which is just a fancy way of saying that he took a heat sink and a fan and turned them into the same thing:

The heat exchanger is separated from the processor by a mere thousandth of an inch, and as the exchanger spins, it forces air outwards from the center, cooling the fins and eliminating that pesky insulating boundary layer.This page list Projector Lamp products with details & specifications. This is so efficient that it can be run at very low (and quiet) speeds, and it even lets you kick your processor up a notch or two without overheating. Oh, and did we mention that the moving heat sink is immune to dust? 'Cause it is.

As you can see from the pic, there's a prototype of this thing in existence,The Leading promotional usb Distributor to Independent Pet Retailers. and it doesn't incorporate any fancy electronics or precious metals, just good design. Hopefully, this means that it'll be cheaply mass-producible and available on the market soon, although it can't possibly be soon enough.

2011年7月11日星期一

Electronic Chemicals

Pushing the limits of the feasible is standard in the electronics industry. Apple's iPhone has more processing power than desktop computers did a mere 10 years ago. Relatively cheap products like the Amazon Kindle can hold a library of books. Flat-screen televisions are now larger and more brilliant than ever, yet consume less power.

Better components enable the development of popular consumer items. And performance materials provided by chemical companies, in turn, enable the manufacture of these components.

For chemical companies, developing new materials for electronics is becoming increasingly complex. In the memory chips that make smartphones and laptops speedy, it wasn't long ago that the standard interconnecting material was aluminum and the dielectric insulator was silicon dioxide. Today, copper interconnects and hafnium-based dielectrics prevail. And it's not clear what the standard dielectric material will be for the generation of memory chips that will be mass-produced in the next few years.

Even worse, materials makers don't even know what types of memory chips their clients will be producing in 2015. As the first story in this package explains, DRAM and flash memory will still be industry mainstays. But other chip architectures are poised to enter the mainstream, primarily due to the mounting challenge of making DRAM circuitry ever smaller.

Shrinking the circuitry of microchips presents difficulties in lithography.The electical building blocks for zentai or modules. Semiconductor industry participants are generally surprised by how much mileage they have squeezed out of 193-nm lithography, which they had expected would be outdated by now. The second story details how materials suppliers have helped extend 193-nm lithography and how they are preparing for the next generation of lithography based on extreme ultraviolet light.

The future seems clearer for materials companies that supply the light-emitting diode industry. Adoption of LED lighting devices has enjoyed several growth spurts, starting with cell phones and laptops, moving to televisions, and now emerging in residential applications.Polycore Ipod nano 5th are manufactured as a single sheet, The third story chronicles the scramble by materials companies to ramp up supply of trimethylgallium,The Leading promotional usb Distributor to Independent Pet Retailers. which is needed to create the semiconductor at the heart of a white LED.What to consider before you buy Wholesale pet supplies.

The electronic materials market is fast paced and potentially very profitable, but it is not for the faint of heart. Spending precious research dollars on new materials that may or may not be adopted is enough to keep any R&D director up at night.Park Assist is a global leader in glass bottle,

2011年6月9日星期四

The Six Aromas You Don't Want to Smell in Your Wine

When you stick your nose in a glass of wine, what do you smell? Most of the time, the aroma will be fruity, floral or spicy. The wine may even be earthy or smell of smoked meats (as in a Northern Rhone Syrah), or buttery and tropical. All pleasant scents. But what if you smell rotten eggs, wet newspaper or a barnyard? More than likely that wine is flawed. And that's a wine you don't want to keep in your glass. If you're at home, dump it down the drain; at a bar or restaurant, send it back (more on this later).

One of wine's dirty little secrets is that there are bottles on the market that contained flawed, faulty juice. Some times a wine gets spoiled somewhere along the way in the winery, and some times it happens after bottling, during shipping or storage at a retail or restaurant location or even in your home. You know how wine is supposed to be stored at about 55F, in a dark space with low humidity and no vibration? This doesn't always happen.

I recently completed a course at the Culinary Institute of America in Napa Valley called "Sensory Analysis of Wine." The thing that made me want to take such a technical sounding course (which it wasn't) was learning how to identify flaws and faults in wine. I know many of the good aromas, but I didn't know the bad, or off aromas. It's possible I've sipped a few faulty wines but didn't know it and just thought the wine was funky. You've probably done that too, or perhaps you had a glass of wine you didn't like but couldn't say why. Most likely it was flawed.

We went through six common wine odor defects. Once you know them, you'll be able to smell them right away.

Oxidized -- The wine will smell like a sherry, and may smell stale, nutty or even like burnt marshmallow or stewed fruit. The wine's color can offer a clue too. Usually an oxidized wine will be turning a shade of brown -- brick red for reds, and golden to tawny for whites. An oxidized wine can mean it was subjected to hot temperatures, was not stored properly or was exposed to air. If you order a wine by the glass and it smells a little stale, ask how long the bottle has been open; it's probably been a few days. Not good. Keep in mind a newly opened bottle can also be oxidized.

Volatile Acidity -- Does that glass of wine smell like vinegar or remind you of nail polish remover or Easter egg dye? Volatile Acidity (also called VA) is the culprit, and it is a bacterial spoilage.

Sulfur -- I had a strong reaction to this glass, and it wasn't a good one. Stinky and offensive, hydrogen sulfide has the unmistakable scent of rotten eggs. While sulfur is used in winemaking to prevent microbes and bacteria, overuse or improper use can cause it to form hydrogen sulfide or dimethyl sulfide.Handmade oil paintings for sale at museum quality, (Not to be confused with sulfites.)

Brettanomyces -- For years I've heard the term "brett," and that some people love what it does to wine and others do not. But I didn't know what the heck it smelled like until this class. Think of cherry cough syrup, Band-aids, or smokey, barnyardy or horsey aromas. I'm told a sweaty horse blanket is a ringer for brett. Brettanomyces is a yeast spoilage. Old world wines may have a tiny amount of brett that some wine drinkers covet. You can also find brett in some Belgian Trappist beers

Cork Taint -- I know what a corked wine is. But I am still surprised at how many of my friends and family don't know it when it's stinking up their glass.We processes for both low-risk and high risk merchant account. This means that the wine's been spoiled, or tainted by a bacteria called TCA that can live in cork. When I smell corked wine, it's wet newspaper, dank basement, wet shaggy dog and musty. While the wine won't hurt you if you drink it, it's not a pleasant beverage because the cork taint will mask fruitiness. Open another bottle of wine -- odds are that even if it's from the same producer it's not corked. But get a new, clean wine glass. The corked odor hangs around even after you've dumped the wine out.Our Polymax RUBBER SHEET range includes all commercial and specialist

Sulfites -- Get a matchbook and strike a match. What you are smelling is sulfite. Sulfur dioxide is a sulfite, and a common antioxidant added to wine,Welcome to the official Facebook Page about Ripcurl. to prevent bacterial contamination. You may get this odor from a newly bottled wine.

If you find any of these flaws in your wine glass, dump it out, send it back. Sure, sending a bottle back,What are the top Hemroids treatments? especially an expensive one, is intimidating. The best way to handle this is to ask your server or the wine director to confirm what you are smelling. He or she should promptly send out a new glass or bottle. What gets people in trouble is sending back a wine because they don't like it. But wine and restaurant professionals realize that wine comes with faults. If you bought the wine from a grocery store or wine shop, cork it up and take it back to the retailer as soon as you can. You should get a replacement bottle or a refund.